Chalk Paint Project Finished

My first chalk paint project is finished.  I am very happy with the results.  This project started with an awesome Craigslist purchase.   $20 - what a deal!

photo from Craigslist

The chair had some great bones.  I started this project by stripping the chair of all fabric.  It wasn't easy...it had nailhead trim all over it.

It was at this point that the fun began.  I had ordered Anne Sloan's chalk paint from Robyn Story Designs, a retailer in Florida.  They were awesome to deal with...I ordered late on a Friday afternoon and received my Anne Sloan paint, waxes and brushes by Wednesday morning. Don't you just love instant gratification?  If you are in the market for chalk paint, you should call Robyn Story Designs...they have inventory of Anne Sloan paint and waxes and are so helpful on the phone.

I started by painting the chair a combination of Duck Egg Blue with highlights of Old White.

After painting the entire chair, I used the clear wax.  I had ordered the wax brush, but because this chair had so much detail, I found it easier to use a rag to apply the wax.  I will use the wax brush on my next project.

You can see in the above photo that when you first apply the clear wax it slightly darkens the paint color.  However, once it dries, it lightens up again.

I tried to get a close up of what it looked like when I went to sand it to start distressing.  I think this is where you can really see the benefit of chalk paint vs. latex.  You know when you go to distress latex how sometimes it doesn't evenly sand off...or it will peel?  That doesn't happen with chalk paint.  It's super easy to distress and even easier to control how much you want distressed.  One tip...definitely wear a mask when you sand.  There is definitely more dust that with latex (however, less after waxing than before...I had sanded some before and then it's like clapping erasers together).

I also ordered the dark wax.  I used this extremely sparingly.  I again used a rag, dipped it in the wax and then wiped off most on a paper towel before applying it to my chair.  I just wanted to give some dimension to the detail...not totally change the color.

I had saved all the pieces from when I took off the original upholstery.  Makes it very easy to use it as a pattern.  I used foam I had for the under cushion.

Using my electric bread knife, I cut the foam to size easily.

I used a drop cloth I purchased from Home Depot as my fabric.  I cut a piece a little larger than I needed and laid it over the seat.

  Using the air compressor staple gun I got for Christmas...

I started stapling...

...and stapling.

Once it was stapled all around, I cut away the excess fabric.

I then cut out the fabric for the arms and the back and front.  I added foam and then stapled it all around.

Again, I cut away the fabric.  It doesn't have to be perfect...the trim will cover all of the staples.

For the back I started by stapling the fabric from the front.  I cut away all the excess.

I then added a piece of batting.

Then I added the cardboard (I used the same piece I had removed...it was still in good shape), then the foam, more batting and then the top fabric.  Yeah...this part wasn't so easy.  With that many layers it was hard to get it all to line up.  However, after I got a few staples in, I was home free.

It was now time for the trim.  I bought the trim from JoAnn's for $0.99/yard and then someone handed me a 10% off coupon when I was checking out, so I only paid $0.89/yard.  I bought eight yards ( I had about a yard left, but my rule of thumb is to always buy more than less...nothing is worse than having to go back out when you are in the middle of a project).

Using my hot glue gun and my scissors (rather than my fingers to push it into place) I attached the trim.  If you've ever worked with hot glue you know that you can burn your fingers so easily, so I like to use my scissors...the glue peels right off the scissors.

I'd like to say I was done at this point, but I still had to make the box cushion for the seat.  Again I used the old fabric as a pattern and cut out a front and a back to the seat cushion and the side panel.  I also made cording to coordinate.

I pinned and then sewed the three layers together.

Here is the final product.  I love how it came out.

I added the pillow as a final touch.

Remember this pillow?  I made it out of two dinner napkins.  All I did to make it fit the new chair was open up the pillow, remove the insert, add a smaller insert and sew a smaller seam.  The width of the pillow stayed the same.

So what do you think of my first attempt at re-upholstery?  It's the perfect addition to my guest room.   I have to be honest...it was so much work.  It took way longer than I ever anticipated, but I love the result.  Can't wait to hear what you think.

-Judy